Aérographe de contrôle de peinture à l'air à gâchette à double action SP130K

Aperçu

Description:

• SIZE：15.5cm*2.8cm
• COLOUR：Copper Plating
• WEIGHT：350g
• MATERIAL：Copper

Key Features:

• Versatile, designed for quick changes of custom mixed colors.
• Dual action trigger controls both air and color (down for air, back for color), which allows the artist to change the width of the line and the capacity of paint.
• Gravity feed works through the top-mounted color cup into the airbrush.
• Perfect for model painting, body painting, nail arts, fine arts, car painting, photo retouching, cake decorating, textiles and T-shirt painting or some other paintings.

Product parameters：

• Nozzle Dia：Airbrush on 0.3, parts 0.2 and 0.5
• Cup Capacity: 7cc 
• Working Pressure:15-50psi
• N.W./G.W.: 298g/350g

Double-action Trigger Air-paint Control

Before use to airbrush debugging to the best state, as follows:

Package Includes:

• 1 x Airbrush

• 1 x Nozzle Wrench

• 1 x Instruction

• 1 x 0.2mm nozzle

• 1 x 0.5mm nozzle

• 1 x 0.5mm nozzle cap

• 1 x 0.2mm jet needle

• 1 x 0.5mm jet needle

• 1 x Fast joint

• 1 x Air hose

kindly Note:
Please receive airbrush after debugging to the best state, and then use a clean water test, atomization is normal, you can use.
Please use the stability, if dropped on the ground, may affect the use effect, or damage.
After use, please clean the airbrush, avoid clogging, effect the next time you normally use.

 In order to protect the item well, a professional person to change needle and nozzle will be recommend.
To prolong your airbrush gun’s life span, please clean your gun in a proper way:It will be better to clean with water thinner like Alcohol after water paint. oil paint should be cleaned with oil thinner like ethyl acetate.

Q&A:
1.    Problems：Paint nozzle leak or abnormal condition of spray.
    Possible reason:  The needle is bent or distorted.
  Solutions:  change accessories/parts
    Possible reason:  Poor connection of nozzle and needle   
  Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net, then use the needle touch the nozzle back and forth; screw tightly the needle chucking net.
2.    Problems：Could not spray or bad atomization
    Possible reason:  nozzle clogged
  Solutions:  clean the nozzle by solvent
    Possible reason:  the needle chucking net is loose   
  Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle and put it back,repeat this action a few times ;screw tightly the needle chucking net.
    Possible reason:  operation button doesn't work  
  Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle and put it back,repeat this action a few times ;screw tightly the needle chucking net.

Critiques

No Reviews.